Header image


  • Easy-to-maneuver
  • Adjustable cutting height
  • Balanced blade pan
  • Puncture-resistant rear tires


Reversible hitch accommodates many types of tractor hookups
    Low hitching point accommodates various tractorsLow hitching point accommodates various tractors

    The lower hitching point on the RC20 Series Rotary Cutter accommodates a reversible front hitch for smaller or older tractors.



Balanced blade pan reduces vibrations
    Statically balanced to reduce vibrationStatically balanced to reduce vibration

    There is one standard blade pan for all four sizes of the RC20 Series Rotary Cutters. The blade pan is stamped instead of fabricated and is statically balanced to reduce vibration. 


    The blade bar is thicker for added durability.

Puncture-resistant rear tires
    Puncture resistant (laminated shown)Puncture resistant (laminated shown)

    Choose a laminated or solid rubber rear tire for the RC20 Series Rotary Cutter. Both are puncture resistant.


    The laminated tire is longer lasting and provides more support when working in sandy or lighter soil conditions.

Deck deflectors offered in chain or rubber
    Chain deflector shownChain deflector shown
    Rubber deflector shownRubber deflector shown

    The front deck and deflector support are flush with the deck on the RC20 Series Rotary Cutters. This allows water and debris an unrestricted exit off the top of the deck.


    These deflectors are available in:

    • Rubber or chain on the front
    • Metal or chain on the rear
Lower lip (Z-profile) increases durability and strength
    Provides extra strength and durabilityProvides extra strength and durability

    The RC20 Series Rotary Cutters have a lower lip (Z-profile), which extends from the skid shoes to where the apron opens up. This Z-profile increases the overall durability and strength of the rotary cutter.

Easy-to-maneuver deck
    Provides easy maneuvering in tight areasProvides easy maneuvering in tight areas

    The round-back deck design on the RC20 Series Rotary Cutter enables easy maneuvering into tight corners and around trees, fences, and other hard-to-reach areas.

Adjustable cutting height
    Cutting heights of 1.5 in. to 9 in.Cutting heights of 1.5 in. to 9 in.

    Adjusting the cutting height is easy. Along with adjusting a tractor's three-point linkage, simply move the support bar to the desired cutting height.


    The RC20 Series Rotary Cutters go as low as 1.5 in. or as high as 9 in.

iMatch™ system provides quick and easy connections
    Provides quick and easy connectionProvides quick and easy connection

    The iMatch system converts a tractor's 3-point hitch to fixed hooks and attaching points for a super-quick connection. (The iMatch hitch is sold separately.)



  • Overall width 129 cm
    51 in.
  • Overall length 220 cm
    87 in.


  • Operating 232 kg
    512 lb

Tractor compatibility

  • PTO horsepower 13-33 kW
    18-45 hp
  • Tractor PTO 540 rpm
  • PTO category ASAE 3

Gear case

  • Horsepower 34 kW
    45 hp


  • Type Shear bolt or slip clutch


  • Type Lift-type
  • Category Cat. 1, adaptable to Cat. 2
  • iMatch? compatible Yes
  • AutoHitch? compatible Yes


  • Thickness 11 gauge
    3 mm
  • Shape Flat-open round back
  • Type Single


  • Thickness 11 gauge
    3 mm


  • Cutting width 122 cm
    48 in.
  • Cutting height 4-23 cm
    1.5-9 in.
  • Cutting diameter 0-2.5 cm
    0-1 in.
  • Cutting chamber depth 19 cm
    7.5 in.


  • Tip speed 66.5) m/s
    13,090 fpm
  • Type Heat treated, suction
  • Thickness 13 mm
    0.5 in.
  • Width 76 mm
    3 in.

Blade holder

  • Type Round pan-type
  • Diameter 567 mm
    22.3 in.


  • Quantity 1
  • Type Solid rubber or laminated
  • Diameter laminated 381 mm
    15 in.
  • Width laminated 95 mm
    3.75 in.
  • Diameter rubber 381 mm
    15 in.
  • Width rubber 95 mm
    3.75 in.


  • Markings Standard
  • Front deflector Standard
  • Rear deflector Standard

Set-up time

  • Labor hours 1


  • Time period 1 year
  • Gearbox 1 year