Header image


  • Compatible with 2032R and 2038R tractors
  • Quik-Park™ mounting system for easy on, easy off in minutes
  • Optional single-point hydraulic coupler lets you connect the hydraulics in one click, no fuss and no mess
  • Quik-Change bucket system allows fast attachment changeovers for moving from chore to chore

View Product Brochure


End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
    Pivot pinPivot pin

    The unique offset head design eliminates cross-pins and cotter pins to retain the pin.


    A nut ensures the pins remain in position.


    A lubrication groove provides a path for lubrication.


    End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.

Quik-Park™ loader mounting system
    Quik-Park loader mounting systemQuik-Park loader mounting system
    Quik-Park loader mounting systemQuik-Park loader mounting system

    The 220R Loader is designed for easy removal/mounting to/from the tractor without tools.


    The parking stand is attached to the mast and lowers into position by moving the joystick to the raise position once the latches are opened to allow the loader to move to the park position.


    To view a video of how the Quik-Park system works, click here.


    NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.


Technical drawing

  • Technical drawing View diagram


  • Model 2032R, 2038R
  • Front tire 23x8.50-14 4PR R4
  • Rear tire 14-17.5 6PR R4
  • Wheelbase 1725 mm
    68 in.
  • Pump capacity 20.2 L/min
    5.3 gpm
  • Rated pressure 17.23 MPa
    2499 psi


  • Leveling configuration Non-Self Leveling
  • Bucket used 1450 mm
    57 in.
  • Bucket weight 88 kg
    194 lb
  • Lift capacity at full height Measured at pivot (U)
    509 kg
    1120 lbMeasured at 500 mm ahead of pivot (V)
    365 kg
    803 lb
  • Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
    589 kg
    1296 lbMeasured at 500 mm ahead of pivot (X)
    445 kg
    979 lb
  • Boom breakout force Measured at pivot (Y)
    886 kgf
    1949 lbfMeasured at 500 mm ahead of pivot (Z)
    618 kgf
    1360 lbf
  • Bucket rollback force capacity At maximum height (VV)
    1044 kgf
    2297 lbfAt 59-in. (1500-mm) lift height (XX)
    1302 kgf
    2864 lbfAt ground-level line (ZZ)
    972 kgf
    2138 lbf
  • Dimensions Maximum lift height (A)
    2160 mm
    85 in.At full height - bucket level(B)
    1999 mm
    79 in.At full height - bucket dumped (C)
    1667 mm
    66 in.
  • Overall length (I+F), ft (m) 3076 mm
    121 in.
  • Digging depth (H) 149 mm
    6 in.
  • Reach At maximum height (D)
    756 mm
    30 in.At ground level - bucket level (F)
    1351 mm
    51 in.
  • Bucket angle Dump angle, degrees (E)
    36 degree (angle)Rollback angle, degrees (G)
    34 degree (angle)Dump angle, ground
    115 degree (angle)
  • Cycle times Loader raise, seconds
    3.19 secondsLoader lower, seconds
    1.94 secondsBucket dump, seconds
    4.76 secondsBucket rollback, seconds
    2.91 seconds