Header image


  • Tool-free removal and attachment with just a few, simple steps
  • Frame design that allows for maximum maneuverability
  • Repositioned leveling links for better visibility
  • Automatic Mast Latch system for quick change from loader to three-point implements


Boom lockout for easy service
    Hydraulic shut-off valve (open position)Hydraulic shut-off valve (open position)
    Hydraulic shut-off valve (closed position)Hydraulic shut-off valve (closed position)

    A hydraulic shut-off valve is included with the R-Series Ag Loaders to ensure the loader does not lower suddenly. For example, this allows the boom to be locked out when someone is required to be located under the loader boom for service work on the tractor. It should not be used for extended periods of time unless an appropriate support stand is also utilized.

Loader options to improve productivity
Single-point hydraulic connection saves time
    Single-point hydraulic connection (open)Single-point hydraulic connection (open)
    Single-point hydraulic connection (closed)Single-point hydraulic connection (closed)

    The 620R, 640R, 660R, and 680R Loaders can be ordered with a single-point hydraulic connection that also incorporates the connection point for any electrical needs. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

Concealed oil lines improve appearance and reduce damage
    Concealed oil lines through boom arm (H-Series Loader is representative only)Concealed oil lines through boom arm (H-Series Loader is representative only)
    Oil lines routed through the boom armOil lines routed through the boom arm
    Oil lines routed through the torque tubeOil lines routed through the torque tube

    Through time, increased width in tractor hoods have caused issues with available space for running traditional oil lines of a loader along the boom, making them more susceptible to damage.


    To improve this situation, the oil lines have been routed through the boom arm and the torque tube, improving line protection and the appearance of the loader.

False rod bucket cylinders improve productivity mechanical self-leveling (MSL) only
    False rod cylinderFalse rod cylinder

    Fast bucket cycle times are important to dump the load from the bucket as quickly as possible (quite often) in order to be as productive as possible while completing loading operations. The bucket cylinder design can have a major impact on this cycle time, especially for the MSL loaders. 


    All MSL R-Series Loaders utilize false rod bucket cylinders. A false rod cylinder has a smaller displacement of oil requirement on the head end of the cylinder, which allows this cylinder to dump much faster than a normal cylinder.

Loader removal (parking) made easy
    Automatic mast latch systemAutomatic mast latch system

    R-Series Loaders are now even easier to remove and reinstall due to an automatic mast latch system. Simply exit the tractor once for removal and once for reinstall to reduce the amount of downtime associated with loader parking.


    For a more detailed look at the steps, please refer to the operator’s manual.

    To remove the loader, follow these simple steps:

    • Set the bucket flat on ground, release the hydraulic pressure, and exit the tractor.
    • Set the adjustable parking stands on the ground. 
    • Flip the lock handles located on either mast to unlock the loader from the frames.

    • Disengage the hydraulic couplers and return to the tractor seat.
    • Back away from the loader.

    To reinstall the loader follow these simple steps:

    • Drive the tractor into the loader, resulting in mechanical connection (no more maneuvering the loader to fit into the frames).
    • Exit the tractor.
    • Fold up the parking stands.
    • Attach the hydraulic connection.
    • Enter the tractor and have full control of the loader.




  • Model 6105R, 6115R, 6125R
  • Front tire 480/70R24
  • Rear tire 520/70R38
  • Wheelbase 2580 mm
  • Pump capacity 114 L/min
  • Rated pressure 2900 psi


  • Leveling configuration Mechanical Self Leveling (MSL)
  • Bucket used HEAVY DUTY 2150 mm
  • Bucket weight 327 kg
    721 lb
  • Lift capacity at full height Measured at pivot (U)
    2522 kg
    5560 lbMeasured at 800 mm ahead of pivot (V)
    1761 kg
    3882 lb
  • Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
    2655 kg
    5853 lbMeasured at 800 mm ahead of pivot (X)
    2080 kg
    4586 lb
  • Boom breakout force Measured at pivot (Y)
    2810 kgf
    6195 lbfMeasured at 800 mm ahead of pivot (Z)
    2110 kgf
    4652 lbf
  • Bucket rollback force capacity At maximum height (VV)
    2505 kgf
    5523 lbfAt 59-in. (1500-mm) lift height (XX)
    4302 kgf
    9484 lbfAt ground-level line (ZZ)
    4364 kgf
    9621 lbf
  • Dimensions Maximum lift height (A)
    4158 mm
    164 in.At full height - bucket level(B)
    3918 mm
    154 in.At full height - bucket dumped (C)
    3149 mm
    124 in.
  • Digging depth (H) -46 mm
    -2 in.
  • Reach At maximum height (D)
    1042 mm
    41 in.At ground level - bucket level (F)
    2804 mm
    110 in.
  • Bucket angle Dump angle, degrees (E)
    -59 degree (angle)Rollback angle, degrees (G)
    52 degree (angle)Dump angle, ground
    -144 degree (angle)
  • Cycle times Loader raise, seconds
    3.5 secondsLoader lower, seconds
    2.63 secondsBucket dump, seconds
    2.65 secondsBucket rollback, seconds
    1.81 seconds