Header image


  • Compatible with the 2025R and 2032R
  • Quik-Park™ loader mounting system
  • Built to improve visibility and stand up to years of use
  • Up to 717 pounds (326 kg) of lift capacity

View Product Brochure


End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
    Pivot pinPivot pin

    The unique offset head design eliminates cross-pins and cotter pins to retain the pin.


    A nut ensures the pins remain in position.


    A lubrication groove provides a path for lubrication.


    End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.

Quik-Park™ loader mounting system
    Quik-Park loader mounting systemQuik-Park loader mounting system

    The H130 Loader is designed for easy removal/mounting to/from the tractor without tools.


    The parking stand is attached to the mast and lowers into position by moving the joystick to the raise position once the latches are opened to allow the loader to move to the park position.


    To view a video of how the Quik-Park™ system works, click here.


    NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.



  • Model 2025R
  • Front tire 23X8.50-12 6PR R4
  • Rear tire 12-16.5 6PR R4
  • Wheelbase 1600 mm
    63.0 in.
  • Pump capacity 12.7 L/min
    3.35 gpm
  • Rated pressure 166.9 bar
    2421 psi


  • Leveling configuration Non-Self Leveling
  • Bucket used 1250 pin-on mm
    49 pin-on in.
  • Bucket weight 70.2 kg
    154.4 lb
  • Lift capacity at full height Measured at pivot (U)
    465 kg
    1023 lbMeasured at 500 mm ahead of pivot (V)
    325 kg
    715 lb
  • Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
    567 kg
    1247 lbMeasured at 500 mm ahead of pivot (X)
    416 kg
    915 lb
  • Boom breakout force Measured at pivot (Y)
    1140 kg
    2508 lbMeasured at 500 mm ahead of pivot (Z)
    734 kg
    1615 lb
  • Bucket rollback force capacity At maximum height (VV)
    749 kgf
    1648 lbfAt 59-in. (1500-mm) lift height (XX)
    931 kgf
    2048 lbfAt ground-level line (ZZ)
    785 kgf
    1727 lbf
  • Dimensions Maximum lift height (A)
    1999 mm
    78.7 in.At full height - bucket level(B)
    1838 mm
    72.4 in.At full height - bucket dumped (C)
    1570 mm
    61.8 in.
  • Overall length (I+F), ft (m) 2.8 m
    9.3 ft
  • Overall height in carry position (J) 1.2 m
    3.9 ft
  • Digging depth (H) 93 mm
    3.7 in.
  • Reach At maximum height (D)
    625 mm
    24.6 in.At ground level - bucket level (F)
    1225 mm
    48.2 in.
  • Bucket angle Dump angle, degrees (E)
    38 degree (angle)Rollback angle, degrees (G)
    24.5 degree (angle)Dump angle, ground
    118 degree (angle)
  • Cycle times Loader raise, seconds
    4.73 secondsLoader lower, seconds
    2.88 secondsBucket dump, seconds
    4.73 (without regen)/1.85 (with regen) secondsBucket rollback, seconds
    2.88 seconds