Header image

Overview

  • Industry-exclusive HydraFlex™ technology
  • 45-foot operating width
  • Wider center feed section
  • 30% stronger reel finger for increased finger life

Features

Control belt speed, side belt speed reduction and integrated belt protection all from the cab

    The speed of the side draper belts can be controlled by an adjustment on the CommandARM™ controls from within the cab. Combine software gives operators the option to slow down the side belts to a fixed speed with a push of a button on the CommandARM. Additionally, a draper belt protection system is integrated into the 600FD HydraFlex™ Draper Platform family to minimize side belt damage should slippage occur.

     

    Feature benefit:

    • Optimal performance in varying crops and conditions through side draper belt speed that ranges from 22.6 m to 228 m (74 ft to 748 ft) per minute and shows on the display in the cab
    • The center draper belt speed is fixed at 211 m (692 ft) per minute for optimal feeding to the combine feederhouse
    • Speed sensors monitor the speed of the idler rollers and should major slippage be experienced, the belts will shut off and an operator warning is shown on the CommandCenter™ display
    • Side belt speed reduction is designed to improve draper performance when the operator is not harvesting the full platform width or when coming out of a headland
    • Increased uptime as the side belt speed reduction feature is engaged/disengaged from the CommandARM controls
    CommandARM controls for S700-Series CombinesCommandARM controls for S700-Series Combines
Industry-exclusive HydraFlex™ technology on 600FD

    The 600FD Series HydraFlex Draper Platform features HydraFlex, an industry-exclusive hydraulic float system allowing for superior ground following capabilities over a wide range of crops and conditions.

     

    Feature benefit:

    • The HydraFlex system hydraulically controls the float of the cutterbar by the turn of a knob in the cab for ease of operation
    • Provides exceptional cutterbar flexibility throughout the entire working pressure range for increased machine performance
    • Unique cutterbar float arms offer a dual purpose allowing for superior ground-following capabilities, plus support to the cutterbar and draper belts for increased productivity
    Hydraulic cylinder in the float armHydraulic cylinder in the float arm
    Float arm on 600FDFloat arm on 600FD
    Functionality

    From the cab, the operator can simply adjust the armrest encoder knob which varies the hydraulic pressure in the float arm hydraulic cylinders. This controls the cutterbar ground pressure depending upon conditions.

     

    With the HydraFlex float system, the operator varies the cutterbar ground pressure but does not affect the cutting height of the crop, even at high ground speeds. The hydraulic float system features a 19-cm (7.5-in.) float range, allowing for optimum float pressure. To lock out the HydraFlex draper into rigid mode, the operator increases the float pressure to maximum.

Dual knife drive is timed
    Dual knife driveDual knife drive

    Dual knife drive is standard on 600FD HydraFlex™ Draper Platform for harvesting rice, tough crop, and wet or green crop conditions. This unique dual knife drive system is timed, creating the smoothest possible reciprocating knife drive system currently in the industry.

     

    Positive, reliable, power take-off (PTO) shaft and driven, dual epicyclical in-line knife drives with built-in driveline protection provides producers with the strongest knife drive system in the industry.

    NOTE: Single-knife drive is available on the 630FD, but increased cutterbar vibration may occur.

Increased handling and productivity with a 41-cm (16-in.) feed drum
    40.64-cm (16-in.) feed drum40.64-cm (16-in.) feed drum

    The 41-cm (16-in.) feed drum improves the crop handoff from the draper belts, resulting in increased material handling and productivity of the 600FD HydraFlex™ Draper Platform.  

    Feed drum retractable auger fingerFeed drum retractable auger finger

    A feature for 600FD Draper Platforms is a feed drum retractable auger finger to improve crop feeding at the corners of the feed drum. In some crop conditions, the crop can hesitate at the corners of the feed drum, and the retractable drum fingers keep the crop moving into the combine. This results in smoother feeding and better performance of the combine.

Specifications

Cutterbar

  • Type Straight-line knife drive system
  • Length 13.72 m
    45 ft
  • Knife drive Dual knife base
  • Knife speed 490 cycles/min
  • Cutterbar tilt Base hydraulic, tilt maximum 9 degree (angle)

Pickup reel

  • Number of slats Six bat poly base
  • Fingers Nylon
  • Diameter 1,067 mm
    42 in.
  • Height control Hydraulic
  • Speed control Hydraulic
  • Reel lift Cylinder range 185 mm
    7.3 in.
    Total range 185 mm
  • Reel fore and aft Cylinder range 359 mm
    14.1 in.
    Total range 499 mm
    19.6 in.
  • Reel resume Base
  • Reel reverse Base
  • Operating speeds 6-70 rpm

Draper belts

  • Width Side belts 1,016 mm
    40 in.
    Center belts 1,776 mm
    70 in.
  • Clean height Cleats 19.05 mm
    0.75 in.
  • Operating speed Side belts: variable up to 228 m/min
    748 fpm
    Center belts 211 m/min
    692 fpm
  • Speed control Hydraulic from cab (side belts only)
  • Center belt reverse Base

Feed drum

  • Diameter 414 mm
    16 in.
  • Feed drum fingers Heavy-duty round diameter with breakaway notch and retainer 16 mm
    0.625 in.
  • Number of fingers 20
  • Auger finger platform Triple chevron, retracting
  • Finger reach 152 mm
    6 in.
  • Drum/auger reverse Base
  • Operating speed 234 rpm
  • Center clean out door Base

Header height sensing

  • Type Electro-hydraulic base
  • Header height sensing on the ground Base
  • Header height sensing off the ground Optional

Auxiliary top auger

  • Type Hydraulic drive, optional

Dimensions

  • Platform length 12.9 m
    42.4 ft
  • Overall operating depth With dividers 2.74 m
    9.0 ft
  • Transport width, field position 13.3 m
    43.7 ft

Weight

  • Approximate weight (pickup reel) 4,264 kg
    9,400 lb