Header image

Overview

  • Perfect for heavy soils, residue sizing/incorporation
  • Five widths from 23'7" to 40'8"
  • Easy-to-tension 2-in. gang bolts
  • Hydraulic fore/aft leveling

View Product Brochure

Features

2600 Series includes disks for light, medium, and heavy-duty tillage

Ground-engaging components on 2623Ground-engaging components on 2623
 
Three-section disk in transportThree-section disk in transport

The John Deere 2600 Series offer three disk models that provide a wide range of variety for all tillage applications.

 Model

2620 Disk 2623 Disk  2625 Disk
 Purpose Secondary (light duty) Dual purpose (medium duty) Primary (heavy duty)
 Working depth (mm, in.) Up to 130 mm (5 in.) Up to 180 mm (7 in.) Up to 200 mm (8 in.)
 Weight per blade (kg, lb) Minimum 68 kg (150 lb) Under 13.4 m (44 ft)
Minimum 86 kg (190 lb)
Over 13.4 m (44 ft)
Minimum 91 kg (200 lb)
Minimum 127 kg (280 lb)
 Blade size (mm, in.) 560 or 610 mm
(22 in. or 24 in.)
610 or 660 mm
(24 in. or 26 in.)
610 or 660 mm
(24 in. or 26 in.)
 Blade spacing (mm, in.) 185 or 230 mm
(7.25 in. or 9 in.)
230 mm (9 in.) 230 mm (9 in.)
(front) and 280 mm
(11 in.) (rear),
or 280 mm (11 in.)
 Horsepower (hp/m, hp/ft) 23 - 36 m/hp (7 - 11 ft/hp)  23 - 36 m/hp (7 - 11 ft/hp)  26 - 36 m/hp (8 - 11 ft/hp)
 Working widths (m, ft) 6.3 m - 15.0 m
(20.75 ft - 49.25 ft)
6.3 m - 15.0 m
(20.75 ft - 49.25 ft
7.2 m-12.4 m
(23.58 - 40.66 ft)
 Operating speed (km/h, mph 6.5 - 11.3 km/h
(4 - 7 mph)
6.5 - 11.3 km/h
(4 - 7 mph)
6.5 - 11.3 km/h
(4 - 7 mph)
 Recommended use
  • Light to medium soils
  • Seedbed preparation
  • Medium to heavy soils
  • Seedbed preparation
  • Residue sizing
  • Residue incorporation
  • Heavy soils
  • Residue sizing
  • Residue incorporation

Different blade options for soil penetration and residue sizing

John Deere's 2600 Series Disks offer different blade options for soil penetration and residue sizing.

Cone bladeCone blade
 
Solid-spherical bladeSolid-spherical blade
 
Cutout-spherical bladeCutout-spherical blade
 Blade type Cone blades
(John Deere exclusive)
Solid-spherical blades Cutout-spherical blades
 Recommended application
  • Primary tillage
  • Aggressive disking
  • Primary tillage
  • Secondary tillage
  • Primary tillage
 Recommended soil type Heavy soils Light to medium soils Heavy to medium soils 
 Benefits Move soil and reside freely, but also increase draft requirements Better control of soil than cone blades since less sensitive to over speeding Chopping or trapping residue
 Penetration Penetrate well at a 20-degree gang angle, but best at a 22-degree gang angle Penetrate best at a 20-degree gang angle Penetration is excellent with a cutout blade


NOTE: Cone blades not recommended in rocky conditions.

DISK BLADE OPTIONS
  • Disk blades compatible with 2620 Disk
  • Disk blades compatible with 2623 Disk
  • Disk blades compatible with 2625 Disk

Variety of residue managing solutions available

Residue managementResidue management

As crop yields increase, so does the amount of residue after harvest. The John Deere 2625 Disk gives operators a primary disk option that has up to 300 lb/blade to size and bury residue in the toughest residue and field conditions.

 

Utilize the residue calculator to identity the optimal residue management solution to meet the operator’s needs.

Hydraulic fore-aft leveling enables operators to level disks from tractor cab

Hydraulic fore-aft levelingHydraulic fore-aft leveling

Hydraulic fore-aft leveling comes as standard equipment with John Deere's 2600 Series Disks. Operators can level the disk from the comfort of the tractor cab.

Easily tension disk gang bolts

50-mm (2-in.) disk gang bolts50-mm (2-in.) disk gang bolts
 
Gang tension systemGang tension system

John Deere's 2600 Series Disks provide an innovative approach to tension disk gang bolts. 

Sealed maintenance-free bearings improve productivity

Sealed maintenance-free bearings (front view)Sealed maintenance-free bearings (front view)
 
Sealed maintenance-free bearings (bottom view)Sealed maintenance-free bearings (bottom view)

John Deere’s 2600 Series Disks feature a sealed maintenance-free bearing. A high-density polymer liner allows the bearing to dynamically align the shaft in rough field conditions. The bearing and high-density polymer liner sit inside cast housing. This cast housing was designed for strength and reliability as well as a built-in bearing wear guard.

These bearings increase productivity by reducing the amount of time needed to service the disk before operation and allowing customers to spend more time in the field.

Specifications

Machine

Working width 9.35 m
30.67 ft
     
Transport width 4.7 m
15.5 ft
     
Transport height 3.96 m
13 ft
     
Gang standards C-spring      
Gang angle 21/19 degree (angle)      
Purpose Primary      
Working depth Up to 20.3 cm
8 in.
     
Weight per blade 127.9 kg
282 lb
     
Blade size 60.96 or 66.04 cm
24 or 26 in.
     
Blade spacing Option one - front and rear spacing both - 280 mm
11 in.
Option two - front spacing / rear spacing - 230 / 280 mm
9 / 11 in.
     
Horsepower per ft (PTO) 6.7 to 8.2 kW
9 to 11 hp
     
Operating speed 8.05 to 11.3 km/h
5 to 7 mph
     

Number of blades

Front blades Option one - 34 with front and rear spacing both - 280 mm
11 in.
Option two - 37 with front spacing / rear spacing of - 230 / 280 mm
9 / 11 in.
     
Rear blades Option one - 34 with front and rear spacing both - 280 mm
11 in.
Option two - 37 with front spacing / rear spacing of - 230 / 280 mm
9 / 11 in.
     
Total Option one - 68 with front and rear spacing both - 280 mm
11 in.
Option two - 74 with front spacing / rear spacing of - 230 / 280 mm
9 / 11 in.
     

Number of C-Springs

Main frame front Option one - 6 with spacing of 280 mm
11 in.
Option two - 6 with spacing of 230 (front) and 280 (rear) mm
9 (front) and 11 (rear) in.
     
Main frame rear Option one - 4 with spacing of 280 mm
11 in.
Option two - 4 with spacing of 230 (front) and 280 (rear) mm
9 (front) and 11 (rear) in.
     
1st wing front Option one - 6 with spacing of 280 mm
11 in.
Option two - 6 with spacing of 230 (front) and 280 (rear) mm
9 (front) and 11 (rear) in.
     
1st wing rear Option one - 6 with spacing of 280 mm
11 in.
Option two - 8 with spacing of 230 (front) and 280 (rear) mm
9 (front) and 11 (rear) in.
     
Total Option one - 22 with spacing of 280 mm
11 in.
Option two - 24 with spacing of 230 (front) and 280 (rear) mm
9 (front) and 11 (rear) in.